Machine Specifications

	MC550	MC650	MC850	MC900
Operating Weight	668 lb.	718 lb.	918 lb.	959 lb.
Height (Steering handle down)	38″		38″	40.5″
Width	32.25″		32.25″	32.25″
Length with Form (steering handle up)	77.5″		77.5″	91.5″
Wheelbase	52.75″		52.75″	71″
Hopper Capacity	6.1 cubic feet		6.1 cubic feet	9.0 cubic feet
Standard Tire Configuration	(9) 8″ dia. x 2″ solid rubber		(9) 8″ dia. x 2″ solid rubber	(4) 4.10 x 3.50 pneumatic front + (3) 8″ dia. x 2.5″ solid rubber rear
Engines	13 HP Honda 14 HP Kohler		20.3 HP Honda	20.3 HP Honda
Engine Starting System	Recoil	Electric	Electric	Electric
Fuel Capacity	1.6 gal.		2.3 gal.	3.3 gal.
Standard Auger Configuration	(2) cast 6″ dia. x 9″ lg.		(2) cast 6″ dia. x 9″ lg.	(3) cast 6″ dia. x 9″ lg.
Optional Auger Configurations	(2) cast 5″ dia. x 9″ lg. (1) welded 8″ dia. x 18″ lg.		(2) cast 5″ dia. x 9″ lg. (1) welded 8″ dia. x 18″ lg. (1) welded 10″ dia. x 18″ lg.	(3) cast 5″ dia. x 9″ lg. (3) welded 8″ dia. x 18″ lg. (3) welded 10″ dia. x 18″ lg.
Hollow Auger Shaft (to extrude rebar)	Optional		Optional	Not available
Drive System	Automatic centrifugal clutch to enclosed 8:1 gear reducer; final auger drive chain & sprocket Extrusion process provides self-propulsion
Steering	Tie rod with 40″ steering handle
Brake	Friction pad on steering handle
OTHER AVAILABLE MODELS: MC655 Same as MC650, but with modified frame allowing extrusion under existing guardrail. MC750 Same as MC650, but with two continuously turning auger assemblies, one mounted on the left and one on the right, allowing immediate changeover from right to left hand extrusion.